3010M - Jenco Vietnam - STC Vietnam
Nhà cung cấp: STC VietNam
Mr. Văn Tú3010M
- Simultaneous displays of conductivity, salinity or TDS with temperature
measurements.
- 50 data set reviewable memory.
- Convenient one point calibration. Calibration data is stored in memory and
ready for use on power up.
- Selectable cell constants for true wide range readings.
- Adjustable TDS coefficient, reference temperature and temperature coefficient.
- Uses one conductivity cell for conductivity, salinity and TDS measurements.
- Accepts 2-wire conductivity cells with K=0.1, 1.0 and 10.0 cell constants for improved flexibility and accuracy.
- Automatic shutoff function (30 minutes of non-use).
- Battery life over 1000 hours.
- IP65 waterproof.
- Low battery indicator.
- RoHS and CE compliant.
Specifications
-
Range Resolution Accuracy Conductivity 0.000 to 9.999uS/cm 0.001 uS/cm ,0.01uS/cm, 0.1uS/ccm,0.01mS/cm ±0.5 % FS 100.0 to 400.0uS/cm 0.00 to 99.99uS/cm 100.00 to 999.9uS/cm 1000 to 9999uS/cm 10.00 to 40.00mS/cm 0.0 to 999.9uS/cm 1000 to 9999uS/cm 10.00 to 99.99uS/cm 100.0 to 400.0mS/cm 10.0 to 99.99uS/cm Salinity 0.0 to 70.0 ppt 0.1 ppt ±0.5% FS Temp. -10.0 to 90.0 °C 0.1 °C ± 0.2 °C or ±0.4%FS General
- Reference temperature: From15.0 to 25 °C,default is 25.0 °C
- Temperature Coefficient: From 0.00 to 4.00%,default is 1.91%
- TDS Constant: From 0.30 to 1.00%,default is 0.65
- Electrode Type / Cell Constant: Two wire K=0.1, 1.0 , 10 conductivity cells ,default is 1,0
- ATC: Thermistor,10k ohm at 25°C
- Power: 9Volt battery
- Operating Ambient Conditions: From 0 to 50°C, at 90% RH
- Weight:/Dimensions(W x D x H):260gm,(batteries included)/70mm x 186mm x37mm
Jenco Vietnam - STC Vietnam
