D1EF81BDBD544EE4BBC266994CF7A593.gif

40W INDUCTION MOTOR SPG Motor - SPG Motor Vietnam - STC Vietnam

Nhà cung cấp: STC VietNam

Liên hệ tư vấn

Mr. Văn Tú

vantu@songthanhcong.com

0359643939

vantu@songthanhcong.com

1. SPECIFICATION

SIZE
mm sq.		 　Type Poles Output Voltage Frequency Duty Rated Load Starting Torque Capacitor
Current Speed Torque
(W) (V) (Hz) (A) (rpm) (kg-cm) (N-m) (kg-cm) (N-m) (uF)

90

 S9l40GA(  )
S9l40GA(  )(TP)
S9l40GA(  )CE		 4 40 1 ø 110 60 Cont. 0.82 1600 2.50 0.250 2.90 0.290 10.0
S9l40GB(  )
S9l40GB(  )(TP)
S9l40GB(  )CE		 4 40 1 ø 220 60 Cont. 0.41 1600 2,50 0.250 2.90 0.290 2.5
S9l40GC(  )
S9l40GC(  )(TP)
S9l40GC(  )CE		 4 40 1 ø 100 50 Cont. 0.80 1300 3.10 0.310 2.40 0.240 10.0
60 0.85 1550 2.60 0.260
S9l40GD(  )
S9l40GD(  )(TP)
S9l40GD(  )CE		 4 40 1 ø 200 50 Cont. 0.41 1300 3.10 0.310 2.40 0.240 2.5
60 0.43 1550 2.60 0.260
S9l40GE(  )
S9l40GE(  )CE		 4 40 1 ø 100 50 Cont. 0.82 1300 3.10 0.310 2.40 0.240 10.0
60 0.85 1550 2.60 0.260
1 ø 115 60 0.91 1550 2.60 0.260 8.0
S9l40GX(  )
S9l40GX(  )CE		 4 40 1 ø 220 50 Cont. 0.34 1250 3.15 0.315 1.80 0.180 2.0
1 ø 240 0.37 3.35 0.335 2.10 0.210
S9l40GU(  )
S9l40GU(  )CE		 4 40 3 ø 200 50 Cont. 0.36 1300 3.10 0.310 6,30 0.630 -
60 0.33 1550 2.60 0.260 5,20 0.520
S9l40GT(  )
S9l40GT(  )CE		 4 40 3 ø 220 50 Cont. 0.39 1350 3.00 0.300 7.60 0.760 -
60 0.33 1550 2.50 0.250 6.10 0.610
S9l40GS(  )
S9l40GS(  )CE		 4 40 3 ø 380 50 Cont. 0.21 1300 3.20 0.320 6.30 0.630 -
60 0.19 1550 2.70 0.270 4.85 0.485
3 ø 400 50 Cont. 0.21 1300 3.30 0.330 6.90 0.690
60 0.19 1550 2.80 0.280 5.25 0.525
3 ø 415 50 Cont. 0.21 1350 3.10 0.310 7.30 0.730
60 0.19 1600 2.60 0.260 5.70 0.570
3 ø 440 50 Cont. 0.21 1350 3.20 0.320 8.20 0.820
60 0.19 1600 2.70 0.270 6.30 0.630

■ S9I40GE is UL approved (UL FILE No. E172720) thermally protected type.

■ Appropriate capacitors shall be used according to the voltage for S9I40GE type since the size of the capacitor differs by different voltages. Malfunction may occur
when not used properly. Capacitor for 115V will be delivered otherwise the required voltage is informed.

■ CE marked at the end of model name indicates that it is thermally protected type which has received CE with built-in TP.
S9I40GE( )CE is available only for 115V specification.

■ TP marked at the end of the model name indicates that it is standard motor with Thermal Protector mounted.
S9I40GE, S9I40GX, S9I40GS is thermally protected type with TP mounted.

■ Be cautious when using a three-phase 380V motor controlled with inverter.

■ ( ) is for marking 'L'type or 'H'. 'L'should be used with gearhead 'L'and 'H'should be used with gearhead 'H'

■ For a three-phase 380V~440V motor, be cautious when using the inverter. When inverter is used, the insulation of winding becomes hot and may cause damage to motor

■ 50Hz

MODEL GEAR RATIO 3 3.6 5 6 7.5 9 10 12.5 15 18 20 25 30 36 40 50 60 75 90 100 120 150 180 200
rpm 500 416 300 250 200 166 150 120 100 83 75 60 50 41 37 30 25 20 16 15 12 10 8 7.5
S9KB□B( ) kg-cm 8.3 9.9 13.8 16.5 20.7 24.8 27.5 34.4 41.3 49.6 49.6 62.1 74.5 89.4 99.3 100 100 100 100 100 100 100 100 100
N·m 0.813 0.970 1.352 1.617 2.029 2.430 2.695 3.371 4.047 4.861 4.861 6.086 7.301 8.761 9.731 9.800 9.800 9.800 9.800 9.800 9.800 9.800 9.800 9.800

■ 60Hz

MODEL GEAR RATIO 3 3.6 5 6 7.5 9 10 12.5 15 18 20 25 30 36 40 50 60 75 90 100 120 150 180 200
rpm 600 500 360 300 240 200 180 144 120 100 90 72 60 50 45 36 30 24 20 18 15 12 10 9
S9KB□B( ) kg-cm 6.8 8.2 11.3 13.6 17.0 20.4 22.7 28.4 34.0 40.8 40.9 51.1 61.3 73.6 81.8 100 100 100 100 100 100 100 100 100
N·m 0.666 0.804 1.107 1.333 1.666 1.999 2.225 2.783 3.332 3.998 4.008 5.008 6.007 7.213 8.016 9.800 9.800 9.800 9.800 9.800 9.800 9.800 9.800 9.800

■ The code in � of gearhead model is for gear ratio. ■ It is the permissible torque of the assembled motor and gearhead.

■ The permissible torque of the motor and inter-decimal gearhead is 100 kg-cm.

■ ■색color indicates that the output shaft of the geared motor rotates in the same direction as the output shaft of the motor. Others indicate rotation in the opposite direction.

■ Rpm is based on synchronous speed (50Hz: 1500rpm, 60Hz: 1800rpm) divided by gear ratio.
The actual rotation speed can be 2~20% less than displayed value depending on the load.

■ ( ) is for marking 'L'type or 'H'. 'L'should be used with motor 'L'and 'H'should be used with motor 'H'.
 

2. DIMENSIONS



3. SCHEMATIC DIAGRAMS

  The direction of motor rotation is as viewed from the front shaft end of the motor.


S9l40GA
S9l40GC

S9l40GB
S9l40GD
CW CCW
S9l40GA(TP)
S9l40GB(TP)
S9l40GC(TP)
S9l40GD(TP)		 S9l40GACE
S9l40GBCE
S9l40GE
S9l40GCCE

S9l40GDCE
S9l40GECE
CW CCW

S9l40GU S9l40GT
CW CCW
 
S9l40GUCE S9l40GTCE
CW CCW

S9l40GS S9l40GSCE
CW CCW
  
S9l40GX S9l40GXCE
CW,CCW

Change the direction of motor rotation only after the motor stops completely. If an attempt is made to change the direction of rotation
while the motor is running, the motor may ignore the reversing command or change its direction of rotation after some delay.

 

SPG Motor Vietnam - STC Vietnam