gvs-204-thang-do-quang-givi-misure-vietnam-stc-vietnam.png
ABSOLUTE OPTICAL SCALE GVS 204 

ĐC ĐIM CHUNG

MECHANICAL

·  Rugged and heavy PROFILE, made of anodized aluminium. Dimensions 55x28 mm.

·  Elastic COUPLING for misalignment compensation and self-correction of mechanical hysteresis. Backlash error <0.2 μm.

·  SEALING LIPS for the protection of the grating, made of special elastomer resistant to oil and wearing. Special self-blocking profile.

·  READER HEAD, consisting of tie rod and reading block, with fully protected place for electronic boards.

·  CARRIAGE guided by ball bearings with gothic arch profile sliding on tempered and grinded guides, to guarantee the system accuracy and the absence of wearing.

·  Die-cast TIE ROD, with nickel-plating surface treatment.

·  Absolute GLASS GRATING placed in the scale housing.

·  Elastomeric GASKETS which allow to reproduce the full protection in mechanical joints (in case of disassembling).

·  Adjustable CABLE output.

·  Various possibilities of application, with double-effect joint or steel wire. GV-PB adapter guarantees the compatibility with scale mod. PBS-HR.

·   Full possibility to disassemble and reassemble the scale.

·   Possibility of direct service.

 

ELECTRICAL

·  Reading device with an infra-red light emitter and receiving photodiodes.

·  Option: A and B (analog 1 Vpp or digital Line Driver) output signals with phase displacement of 90° (electrical).

·  Serial protocol SSI - BiSS C (unidirectional).

·  CABLE:

- Shielded twisted pair for digital signals (SSI - BiSS).

- The cable is suitable for continuous movements.

SERIAL OUTPUT VERSION

- 6-wire shielded cable Æ = 7 mm, PVC external sheath, with low friction coefficient, oil resistant.

- Conductors section: power supply 0.25 mm2; signals 0.25 mm2.

The cable’s bending radius should not be lower than 70 mm.

ANALOG or DIGITAL + SERIAL OUTPUT VERSION

- 10-wire shielded cable Æ = 7.1 mm, PUR external sheath.

- Conductors section: power supply 0.35 mm2; signals 0.10 mm2.

The cable’s bending radius should not be lower than 80 mm.

SIGNALS

CONDUCTOR COLOR

+ V

Brown

0 V

White

CK

Green

CK

Yellow

D

Pink

D

Grey

SCH

Shield

 

Cod. GVS

204

Measuring support

Grating pitch

Linear thermal expansion coefficient

glass scale

20 µm P

8 x 10-6 °C-1

Incremental signal (optional)

sine wave 1 Vpp or TTL Line Driver

Resolution 1 Vpp

up to 0.1 μm *

Resolution Line Driver

5 µm

Signal period

20 µm

Serial interface

SSI - BiSS C (unidirectional)

Resolution absolute measure

1 μm - 0.1 μm

Accuracy grade

± 2.5 μm **  standard version

± 1 μm **  high-accuracy version

Measuring length ML in mm

170, 220, 270, 320, 370, 420, 470, 520, 570,

620, 720, …

Max. traversing speed

60 m/min

Max. acceleration

20 m/s2

Required moving force

£ 1.5 N

Vibration resistance (EN 60068-2-6)

80 m/s2 [55 ¸ 2000 Hz]

Shock resistance (EN 60068-2-27)

150 m/s2 [11 ms]

Protection class (EN 60529)

IP 54 standard IP 64 pressurized

Operating temperature

0 °C ¸ 50 °C

Storage temperature

-20 °C ¸ 70 °C

Relative humidity

20% ¸ 80% (not condensed)

Reading block sliding

by ball bearings  ¥

Power supply

5 Vdc ± 5% or 10 ÷ 28 Vdc

Current consumption (with R = 120 W)

350 mAMAX 180 mATYP  5 Vdc

70 mAMAX  35 mATYP 10 ÷ 28 Vdc

Max. cable length

20 m ***

Electrical connections

see related table

Electrical protections

inversion of polarity and short circuits

Weight

900 g + 1850 g/m

 

  *  Depending on CNC division factor.
**    The declared accuracy grade of ± X μm is referred to a measuring length of 1 m.
***  Ensuring the required power supply voltage to the transducer, the maximum cable length can be extended to 50 m.
BiSS C (unidirectional) Version SSI Version
Interface BiSS C unidirectional Interface SSI   Binary – Gray
Signals level EIA RS 485 / RS 422 Signals level EIA RS 422
Clock frequency 0.1 ¸ 8 MHz Clock frequency 0.1 ¸ 1.2 MHz
n 26 + 2 + 6 bit n 26 bit
TC 8 μs TC max. 25 μs
TACK max. 22 μs TD max. 7 μs