Inductive sensor 

Order Code:  BES00AM


Size M30
Connection Cable, 2m, PUR
Switching output / function NPN/Normally open (NO)
Operating voltage 10...30 V DC
Mechanical installation condition Non embeddable
Rated operating distance Sn 30 mm

General attributes

Trade name GlobalProx
Ready delay tv max. 20 ms
Utilisation category DC 13
Switching freq. f max. 300 Hz
Temp. drift max. (% of Sr) 10%
Repeat accur. R max. (% of Sr) 5 %
Power-on indicator No
Basic standard IEC 60947-5-2
Function indicator Yes
Short-circuit protected Yes
Degree of protection as per IEC 60529 IP67
Protected against polarity reversal Yes
Protected against reverse connection Yes
Additional text The sensor is functional again after the overload has been eliminated.
Unshielded: See installation instructions for inductive sensors with extended switching distance 853924.

Electrical attributes

Output resistance Ra 33.0k + D
Rated operating voltage Ue DC 24 V
Effective operating current Ie 200 mA
Rated insulation voltage Ui 250 AC
Rated short circuit current 100 A
Electrical version DC, direct current
Hysteresis H max. (in % of Sr) 20 %
Minimum operating current Im 0 mA
Load capacitance max. (at Ue) 0,5 µF
No-load current Io damped 14 mA
No-load current Io undamped 3 mA
Off-state current Ir max. 10 µA
Ripple max. (% of Ue) 15 %
Switching output NPN
Switching function Normally open (NO)
Voltage drop static max. 2,5 V
Principle of operation Inductive
Operating voltage 10...30 V DC

Mechanical attributes

Ambient temperature -25
Number of conductors 3
Tightening torque max. 70 Nm
Assured operating distance Sa 0...24 mm
Cable short designation Li9Y11Y-O
Cable length 2 m
Conductor cross-section 0.34 mm²
Surface protection Nickel-free coating
Eff. switching distance Sr 30 mm
Shock rating Shock, half-sinus, 30 gn, 11ms
Vibration rating 55 Hz, 1 mm ampl., 3x30 min
Degree of contamination 3
Sensing surface material PBT
Housing material Brass
Cable jacket material PUR
Cable diameter D max. 4,6
Tolerance Sr ±10 %


Balluff Vietnam - STC Vietnam