Micropulse transducers BTL7-E100-M0500-A-S115 - Balluff Vietnam - STC Vietnam
Nhà cung cấp: STC VietNam
Mr. Văn TúMicropulse transducers
Picture can differ from actual product
Order Code: BTL0KKF
BTL7-E100-M0500-A-S115
Keyfeatures
| Connection | Connector, M12 |
|---|---|
| Operating voltage | 20...28 V DC |
| For dynamic loop applications | No |
| Interface | Analog interface, current |
| Design | Series Rod |
| Approvals | CE, cURus |
General attributes
| Short-circuit protected | to GND and to 36 V DC |
|---|---|
| Degree of protection as per IEC 60529 | IP67 (with connector) |
| Protected against polarity reversal | Up to 36 V |
| No of magnets, factory setting | 1 |
Electrical attributes
| Connection type | Connector |
|---|---|
| Output signal | 4…20 mA |
| Galvanic isolation | No |
| Interface | Analog |
| Ripple | 0.5 Vpp |
| Current consumption (at 24 V DC) | ≤ 150 mA |
| Inrush current | ≤ 500 mA / 10 ms |
| Overvoltage protected | Up to 36 V |
| Voltage-proof (GND – housing) | 500 V AC |
| Output signal adjustable | Via programming inputs, With setup tool |
| Error signal output 1 | 3.6 mA |
| For dynamic loop applications | No |
| Number of magnets max. | 1 |
| Programming inputs | 20 … 28 V DC, High-active |
| Interface | Analog interface, current |
| Switch-on delay max. | 400 ms |
| Operating voltage | 20...28 V DC |
Mechanical attributes
| Pressure resistance | ≤ 600 bar |
|---|---|
| Connector type | M12 |
| Ambient temperature Ta min. | -40 °C |
| Ambient temperature Ta max. | 85 °C |
| Housing material | Anodized aluminum |
| Number of pins | 8 |
| Version | Type A |
| Mounting type | Threaded flange M18x1.5 |
| Nominal stroke | 500 mm |
| Repeat accuracy | ±5 µm |
| Sampling rate max. | 2 kHz |
| TK, typ. (at 50% of 500 mm) | ≤ 30 ppm/K |
| Storage temperature min. | -40 °C |
| Storage temperature max. | 100 °C |
| Relative humidity | < 90%, non-condensing |
| EN 60068-2-27 (shock) | 150 g / 6 ms |
| EN 60068-2-29 (cont. shock) | 150 g / 2 ms |
| EN 60068-2-6 (vibration) | 20 g, 10…2000 Hz |
| EN 60068-2-64 (noise) | 5 g, 10…2000 Hz |
| EN 55016-2-3 (emission) | Class A+B |
| EN 61000-4-2 (ESD) | Severity Level 3 |
| EN 61000-4-3 (RFI) | Severity Level 3 |
| EN 61000-4-4 (burst) | Severity Level 3 |
| EN 61000-4-5 (surge) | Severity Level 2 |
| EN 61000-4-6 (HF fields) | Severity Level 3 |
| EN 61000-4-8 (magnetic fields) | Severity Level 4 |
| Outer tube diameter | 10,2 mm |
| Outer tube wall thickness | 2 mm |
| Flange material | Stainless steel 1.3952 |
| Outer tube material | Stainless steel 1.4571 |
| E module | 200 kN/mm² |
| Offset mounting surface | No |
| Plug, length | 5,5 mm |
| Plug, with internal thread M4 | Yes |
| With O-ring | No |
| Cable/connector out | Axial |
| Null point | 30 mm |
Balluff Vietnam - STC Vietnam
