Mr. Văn Tú| SERVOTOUGH 2200 OXIDATION CONTROL TRANSMITTER | |
| 02223A1 | |
| TRANSMITTER TYPE | |
| Hazardous Area ATEX Cat 2 (Zone 1) | |
| Hazardous Area FM Div 1 | |
| Hazardous Area CSA Div 1 | |
| IEC Ex ia d IIC | |
| TIIS Ex ia d IIC | |
| VOLTAGE | |
| 100-120 Vac 50/60 Hz | |
| 220-240 Vac 50/60 Hz | |
| QUICKSTART MANUAL | |
| English | |
| French | |
| German | |
| SERVICE MANUAL | |
| None | |
| English | |
| ELECTRICAL ENTRY KITS | |
| None (standard 3/4"NPT ) | |
| Adaptor Kit - M20 | |
| Adaptor Kit - Pg 13.5 | |
| SAMPLE CELL TYPE | |
| Standard | |
| High Pressure Solvent Resistant | |
| SAMPLE INTERNAL PIPEWORK | |
| Stainless Steel, 250 ml/min maximum flow rate | |
| Hastelloy, 250 ml/min maximum flow rate | |
| Stainless Steel, 1Litre/min maximum flow rate | |
| Hastelloy, 1 Litre/min maximum flow rate | |
| INTERNAL FILTER | |
| None | |
| Stainless Steel | |
| Hastelloy | |
| FLOW ALARM | |
| Fitted | |
| Not Required | |
| INTERNAL PRESSURE COMPENSATION | |
| None | |
| Stainless Steel | |
| Hastelloy | |
| GAS CONNECTION KITS | |
| Standard - 1/8" NPT Female | |
| 1/4" NPT 316 SS Adaptor | |
| 1/4" NPT Hastelloy Adaptor | |
| 6mm OD Stainless Steel - Sample Adaptor | |
| 6mm OD Hastelloy - Sample Adaptor | |
| PURGE FITTINGS | |
| None | |
| Corrosive Sample Purge | |
| SERVOTOUGH 2500 SpectraExact Analyser | |
| 02500D1 | |
| ANALYSER TYPE | |
| 2500 GEN | Safe Area |
| 2500 EU2 | Haz. Area ATEX Cat. 3G (Zone 2) |
| 2500 EX2 | Haz. Area IECEx (Zone 2) |
| 2500 EU1 | Haz. Area ATEX Cat. 2G (Zone 1) |
| 2500 EX1 | Haz. Area IECEx (Zone 1) |
| 2500 DU1 | Haz. Area ATEX Cat. 2D (Zone 21) |
| 2500 DX1 | Haz. Area IECEx (Zone 21) |
| 2500 FM2 | Class 1, Div 2 without safety purging |
| 2510 GEN | Safe Area |
| 2510 EU2 | Haz. Area ATEX Cat. 3G (Zone 2) |
| 2510 EX2 | Haz. Area IECEx (Zone 2) |
| 2510 EU1 | Haz. Area ATEX Cat. 2G (Zone 1) |
| 2510 EX1 | Haz. Area IECEx (Zone 1) |
| 2510 DU1 | Haz. Area ATEX Cat. 2D (Zone 21) |
| 2510 DX1 | Haz. Area IECEx (Zone 21) |
| 2510 FM2 | Class 1, Div 2 without safety purging |
| 2510 HTV | High Temperature, Safe Area |
| 2520 GEN | Safe Area |
| 2520 EU2 | Haz. Area ATEX Cat. 3G (Zone 2) |
| 2520 EX2 | Haz. Area IECEx (Zone 2) |
| 2520 DU1 | Haz. Area ATEX Cat. 2D (Zone 21) |
| 2520 DX1 | Haz. Area IECEx (Zone 21) |
| 2520FM2 | Class 1, Div 2 without safety purging |
| 2550 GEN | Safe Area |
| 2550 EU2 | Haz. Area ATEX Cat. 3G (Zone 2) |
| 2550 EX2 | Haz. Area IECEx (Zone 2) |
| 2550 EU1 | Haz. Area ATEX Cat. 2G (Zone 1) |
| 2550 EX1 | Haz. Area IECEx (Zone 1) |
| 2550 DU1 | Haz. Area ATEX Cat. 2D (Zone 21) |
| 2550 DX1 | Haz. Area IECEx (Zone 21) |
| 2550 FM2 | Class 1, Div 2 without safety purging |
| CONFIGUATION | |
| Stand Alone 115/230Vac | |
| Stand Alone 115/230Vac (EU1/EX1 only) | |
| Stand Alone 100/200Vac | |
| Stand Alone 100/200Vac (EU1/EX1 only) | |
| MEASUREMENT | |
| 2500 Gas | |
| Acetic Acid | |
| Acetone | |
| Acetylene | |
| Ammonia | |
| Benzene | |
| Butane | |
| Carbon dioxide in N2 | |
| Carbon dioxide in HCs | |
| Carbon monoxide | |
| Carbon disulphide | |
| Carbonyl sulphide | |
| Chloroform | |
| Dichloromethane | |
| Ethane | |
| Ethanol | |
| Ethylene | |
| Ethylene Oxide | |
| Freon R134A | |
| Freon R22 | |
| Hydrogen chloride | |
| Hydrogen cyanide | |
| Hydrogen sulphide | |
| n-Hexane | |
| Methane | |
| Methanol | |
| Nitric oxide | |
| Nitrous oxide | |
| Nitrogen dioxide | |
| Phosgene | |
| Propane | |
| Propylene | |
| Sulphur dioxide | |
| Total Hydrocarbons | |
| Toluene | |
| Water vapour | |
| 2500 Liquid | |
| Water in Acetic Acid <10%wt | |
| Water in Acetic Acid >10%wt | |
| Water in Acetone | |
| Water in ethylene dichloride | |
| Water in Glycols | |
| Water in n methyl pyrrolidone | |
| Water in tetrahydrofuran | |
| Water in vinyl acetate monomer | |
| Water in vinyl chloride monomer | |
| Water in methanol | |
| Water in ethanol | |
| Water in Isobutanol | |
| Sodium hydroxide in water | |
| NCO in o-dichlorobenzene | |
| 2510 | |
| Acetylene | |
| Carbon dioxide LO | |
| Carbon dioxide HI | |
| Carbon monoxide LO | |
| Carbon monoxide HI | |
| Acetylene | |
| Hydrogen chloride | |
| Methane | |
| Nitric oxide | |
| Sulphur dioxide | |
| Nitrous oxide | |
| 2520 | |
| Chlorine | |
| Fluorine | |
| Bromine | |
| 2550 | |
| Ethylene and carbon monoxide | |
| Carbon dioxide and CO | |
| Ethylene and carbon dioxide | |
| Ethylene, CO and CO2 | |
| Methane and CO | |
| Methane and CO2 | |
| Methane, CO and CO2 | |
| Methane and ethylene | |
| Propane and CO | |
| Butane, CO and CO2 | |
| Butane and propylene | |
| Ethane and propylene | |
| Water vapour and acetic acid | |
| Acetone and carbon monoxide | |
| Carbonyl sulphide and SO2 | |
| SAMPLE CELL (LENGTH AND MATERIAL) | |
| 1mm Stainless steel cell | |
| 2mm Stainless steel cell | |
| 4mm Stainless steel cell | |
| 8mm Stainless steel cell | |
| 16mm Stainless steel cell | |
| 32mm Stainless steel cell | |
| 64mm Stainless steel cell | |
| 128mm Stainless steel cell | |
| 256mm Stainless steel cell | |
| 512mm Stainless steel cell | |
| 1000mm Stainless steel cell | |
| 1mm Hastelloy C cell | |
| 2mm Hastelloy C cell | |
| 4mm Hastelloy C cell | |
| 8 to 32mm Hastelloy cell | |
| 64 to 128mm Hastelloy cell | |
| 256mm Hastelloy cell | |
| 512mm Hastelloy cell | |
| 1000mm Hastelloy cell | |
| 1mm Monel cell | |
| 2mm Monel cell | |
| 4mm Monel cell | |
| 8 to 32mm Monel cell | |
| 64 to 128mm Monel cell | |
| 256mm Monel cell | |
| 512mm Monel cell | |
| 1000mm Monel cell | |
| 1 to 4mm Titanium cell | |
| 8 to 32mm Titanium cell | |
| 64 to 128mm Titanium cell | |
| 256mm Titanium cell | |
| 512mm Titanium cell | |
| 1000mm Titanium cell | |
| OPTICS - LENSES | |
| CaF2 | |
| CaF2 (2520) | |
| BaF2 | |
| ZnSe | |
| Glass (not 2510) | |
| OPTICS - WINDOWS | |
| CaF2 | |
| BaF2 | |
| ZnSe | |
| Spectrosil | |
| Sapphire | |
| Glass | |
| DETECTOR | |
| CaF2 | |
| KRS-5 | |
| Covered FET | |
| Soft - UV (2520) | |
| SAMPLE CELL 'O' RING MATERIAL | |
| Viton | |
| Chemraz | |
| PTFE | |
| SCRUBBERS | |
| Mix throughout | |
| H2O throughout | |
| Mix + Purged Bosses | |
| H2O + Purged Bosses | |
| Mix + CO throughout | |
| Mix + CO + Purged Bosses | |
| H2O + CO2 + Bosses (EU1 only) | |
| H2O + End Bosses (EU1 only) | |
| H2O + CO2 + CO + End Bosses (EU1 only) | |
| Purged Bosses (EU1 only) | |
| SOURCE | |
| CaF2 sealed | |
| BaF2 sealed | |
| ZnSe sealed | |
| CaF2 short wavelength (not 2510) | |
| Glass short wavelength (not 2510) | |
| Soft - UV (2520) | |
| CELL HEATER | |
| None | |
| Heated cell T4 < 80C | |
| Heated cell T3 < 130C | |
| Steam heated (GEN & EU1 only) | |
| Heated cell > 180C (HTV only) | |
| CROSS INTERFERENCE | |
| Yes | |
| No | |
| OUTPUTS | |
| None | |
| 2 mA + 2 relay | |
| DIGITAL COMMUNICATIONS | |
| None | |
| Modbus RTU (RS-485) | |
| Modbus TCP (Ethernet) | |
| SAMPLE COMPENSATIONS | |
| None | |
| Sample Pressure Learnt (GEN only) | |
| Sample Pressure Learnt + Barrier (EU1 only) | |
| Sample Temperature - Liquid | |
| Sample Temperature - Gas (NO CELL HEATER REQUIRED) | |
| Sample Pressure Learnt (FM2 or EU2 only) | |
| APLLICATION VARIANT | |
| ADDER A | |
| ADDER B | |
| ADDER C | |
| ADDER D | |
| ADDER E | |
| ADDER F | |
| ADDER G | |
| ADDER H | |
| ADDER I | |
| ADDER J | |
| ADDER K | |
| ADDER L | |
| ADDER M | |
| ADDER N | |
| ADDER O | |
| ADDER P | |
| ADDER Q | |
| ADDER R | |
| ADDER S | |
| ADDER T | |
| ADDER U | |
| ADDER V | |
| ADDER W | |
| ADDER X | |
| ADDER Y | |
| ADDER Z | |
| FIXED VARIANTS | |
| 02500D1V03 | |
