3W INDUCTION MOTOR SPG Motor - SPG Motor Vietnam - STC Vietnam
Nhà cung cấp: STC VietNam
Mr. Văn Tú1. SPECIFICATION
|
SIZE mm sq. |
Type | Poles | Output | Voltage | Frequency | Duty | Rated Load | Starting Torque | Capacitor | ||||
| Current | Speed | Torque | |||||||||||
| (W) | (V) | (Hz) | (A) | (rpm) | (kg-cm) | (N-m) | (kg-cm) | (N-m) | (uF) | ||||
|
60 |
S6I03GA S6I03GACE |
4 | 3 | 1 ø 110 | 60 | Cont. | 0.15 | 1500 | 0.21 | 0.021 | 0.25 | 0.025 | 2.0 |
|
S6I03GC S6I03GCCE |
4 | 3 | 1 ø 100 | 50 | Cont. | 0.15 | 1200 | 0.25 | 0.025 | 0.25 | 0.025 | 2.0 | |
| 60 | 1450 | 0.21 | 0.021 | ||||||||||
|
S6I03GE S6I03GECE |
4 | 3 | 1 ø 100 | 50 | Cont. | 0.15 | 1200 | 0.25 | 0.025 | 0.25 | 0.025 | 2.0 | |
| 60 | 1450 | 0.21 | 0.021 | ||||||||||
| 1 ø 115 | 60 | 0.15 | 1450 | 0.21 | 0.021 | 1.5 | |||||||
|
■ Appropriate capacitors shall be used according to the voltage for S6I03GE type since the size of the capacitor differs by different voltages. Malfunction may occur when not used properly. Capacitor for 115V will be delivered otherwise the required voltage is informed. ■ CE marked at the end of model name indicates that it is impedance protected type which has received CE. S6I03GECE is available only for 115V specification. ■ "L"or "H"type does not apply to motors under 40W. |
■ 50Hz
| MODEL | GEAR RATIO | 3 | 3.6 | 5 | 6 | 7.5 | 9 | 10 | 12.5 | 15 | 18 | 20 | 25 | 30 | 36 | 40 | 50 | 60 | 75 | 90 | 100 | 120 | 150 | 180 | 200 | 250 |
| rpm | 500 | 416 | 300 | 250 | 200 | 166 | 150 | 120 | 100 | 83 | 75 | 60 | 50 | 41 | 37 | 30 | 25 | 20 | 16 | 15 | 12 | 10 | 8 | 7.5 | 6 | |
| S6DT□B | kg-cm | 0.6 | 0.7 | 1.0 | 1.2 | 1.5 | 1.8 | 2.0 | 2.5 | 3.0 | 3.6 | 3.6 | 4.6 | 5.5 | 6.6 | 7.3 | 8.2 | 9.8 | 12.3 | 15.0 | 15.0 | 15.0 | 15.0 | 15.0 | 15.0 | 15.0 |
| N·m | 0.06 | 0.07 | 0.10 | 0.12 | 0.15 | 0.18 | 0.20 | 0.25 | 0.30 | 0.36 | 0.36 | 0.46 | 0.55 | 0.66 | 0.73 | 0.82 | 0.98 | 1.23 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 |
■ 60Hz
| MODEL | GEAR RATIO | 3 | 3.6 | 5 | 6 | 7.5 | 9 | 10 | 12.5 | 15 | 18 | 20 | 25 | 30 | 36 | 40 | 50 | 60 | 75 | 90 | 100 | 120 | 150 | 180 | 200 | 250 |
| rpm | 600 | 500 | 360 | 300 | 240 | 200 | 180 | 144 | 120 | 100 | 90 | 72 | 60 | 50 | 45 | 36 | 30 | 24 | 20 | 18 | 15 | 12 | 10 | 9 | 7.2 | |
| S6DT□B | kg-cm | 0.5 | 0.6 | 0.8 | 1.0 | 1.3 | 1.5 | 1.7 | 2.1 | 2.6 | 3.1 | 3.4 | 3.8 | 4.6 | 5.5 | 6.8 | 6.9 | 8.3 | 10.0 | 12.0 | 14.0 | 15.0 | 15.0 | 15.0 | 15.0 | 15.0 |
| N·m | 0.05 | 0.06 | 0.08 | 0.10 | 0.13 | 0.15 | 0.17 | 0.21 | 0.26 | 0.31 | 0.34 | 0.38 | 0.46 | 0.55 | 0.68 | 0.69 | 0.83 | 1.0 | 1.2 | 1.4 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 |
|
■ The code in□of gearhead model is for gear ratio. ■ It is the permissible torque of the assembled motor and gearhead. ■ The permissible torque of the motor and inter-decimal gearhead is 5 kg-cm.
■ ■color indicates that the output shaft of the geared motor rotates in the same direction as the output shaft of the motor. ■ Rpm is based on synchronous speed (50Hz: 1500rpm, 60Hz: 1800rpm) divided by gear ratio. ■ "L"or "H"type does not apply to motors under 40W. |
 |
| 2. DIMENSIONS |
|
|
| 3. SCHEMATIC DIAGRAMS |
| ※The direction of motor rotation is as viewed from the front shaft end of the motor. | ||||||
while the motor is running, the motor may ignore the reversing command or change its direction of rotation after some delay. |
||||||
|
|
SPG Motor Vietnam - STC Vietnam
