DFS60B-S1AA03916 Bộ mã hóa Sick STC Việt Nam

Tính năng

• Performance

  Pulses per revolution	3,916 1)
  Measuring step	90° electric/pulses per revolution
  Measuring step deviation at non binary number of lines	± 0.01°
  Error limits	± 0.05°

  • ¹⁾ See maximum revolution range.

• Interfaces

  Communication interface	Incremental
  Communication Interface detail	TTL / RS-422
  Number of signal channels	6-channel
  Initialization time	40 ms
  Output frequency	≤ 600 kHz
  Load current	≤ 30 mA
  Operating current	40 mA (without load)

• Electrical data

  Connection type	Male connector, M23, 12-pin, radial
  Supply voltage	4.5 ... 5.5 V
  Reference signal, number	1
  Reference signal, position	90°, electric, logically gated with A and B
  Short-circuit protection of the outputs	✔ 1)
  MTTFd: mean time to dangerous failure	300 years (EN ISO 13849-1) 2)

  • ¹⁾ Short-circuit opposite to another channel, US or GND permissable for maximum 30 s.
  • ²⁾ This product is a standard product and does not constitute a safety component as defined in the Machinery Directive. Calculation based on nominal load of components, average ambient temperature 40°C, frequency of use 8760 h/a. All electronic failures are considered hazardous. For more information, see document no. 8015532.

• Mechanical data

  Mechanical design	Solid shaft, Servo flange
  Shaft diameter	6 mm
  Shaft length	10 mm
  Weight	+ 0.3 kg
  Shaft material	Stainless steel
  Flange material	Aluminum
  Housing material	Aluminum die cast
  Start up torque	0.5 Ncm (+20 °C)
  Operating torque	0.3 Ncm (+20 °C)
  Permissible shaft loading radial/axial	80 N (radial) 40 N (axial)
  Operating speed	≤ 9,000 min⁻¹ 1)
  Moment of inertia of the rotor	6.2 gcm²
  Bearing lifetime	3.6 x 10^10 revolutions
  Angular acceleration	≤ 500,000 rad/s²

  • ¹⁾ Allow for self-heating of 3.3 K per 1,000 rpm when designing the operating temperature range.

• Ambient data

  EMC	According to EN 61000-6-2 and EN 61000-6-3
  Enclosure rating	IP67, Housing side, male connector (according to IEC 60529) 1) IP65, shaft side (according to IEC 60529)
  Permissible relative humidity	90 % (condensation of the optical scanning not permitted)
  Operating temperature range	–40 °C ... +100 °C 2) –30 °C ... +100 °C 3)
  Storage temperature range	–40 °C ... +100 °C, without package
  Resistance to shocks	70 g, 6 ms (according to EN 60068-2-27)
  Resistance to vibration	30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)

  • ¹⁾ With mating connector fitted.
  • ²⁾ Stationary position of the cable.
  • ³⁾ Flexible position of the cable.

    • Performance

      Pulses per revolution	3,916 1)
      Measuring step	90° electric/pulses per revolution
      Measuring step deviation at non binary number of lines	± 0.01°
      Error limits	± 0.05°

      • ¹⁾ See maximum revolution range.

    • Interfaces

      Communication interface	Incremental
      Communication Interface detail	TTL / RS-422
      Number of signal channels	6-channel
      Initialization time	40 ms
      Output frequency	≤ 600 kHz
      Load current	≤ 30 mA
      Operating current	40 mA (without load)

    • Electrical data

      Connection type	Male connector, M23, 12-pin, radial
      Supply voltage	4.5 ... 5.5 V
      Reference signal, number	1
      Reference signal, position	90°, electric, logically gated with A and B
      Short-circuit protection of the outputs	✔ 1)
      MTTFd: mean time to dangerous failure	300 years (EN ISO 13849-1) 2)

      • ¹⁾ Short-circuit opposite to another channel, US or GND permissable for maximum 30 s.
      • ²⁾ This product is a standard product and does not constitute a safety component as defined in the Machinery Directive. Calculation based on nominal load of components, average ambient temperature 40°C, frequency of use 8760 h/a. All electronic failures are considered hazardous. For more information, see document no. 8015532.

    • Mechanical data

      Mechanical design	Solid shaft, Servo flange
      Shaft diameter	6 mm
      Shaft length	10 mm
      Weight	+ 0.3 kg
      Shaft material	Stainless steel
      Flange material	Aluminum
      Housing material	Aluminum die cast
      Start up torque	0.5 Ncm (+20 °C)
      Operating torque	0.3 Ncm (+20 °C)
      Permissible shaft loading radial/axial	80 N (radial) 40 N (axial)
      Operating speed	≤ 9,000 min⁻¹ 1)
      Moment of inertia of the rotor	6.2 gcm²
      Bearing lifetime	3.6 x 10^10 revolutions
      Angular acceleration	≤ 500,000 rad/s²

      • ¹⁾ Allow for self-heating of 3.3 K per 1,000 rpm when designing the operating temperature range.

    • Ambient data

      EMC	According to EN 61000-6-2 and EN 61000-6-3
      Enclosure rating	IP67, Housing side, male connector (according to IEC 60529) 1) IP65, shaft side (according to IEC 60529)
      Permissible relative humidity	90 % (condensation of the optical scanning not permitted)
      Operating temperature range	–40 °C ... +100 °C 2) –30 °C ... +100 °C 3)
      Storage temperature range	–40 °C ... +100 °C, without package
      Resistance to shocks	70 g, 6 ms (according to EN 60068-2-27)
      Resistance to vibration	30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)

      • ¹⁾ With mating connector fitted.
      • ²⁾ Stationary position of the cable.
      • ³⁾ Flexible position of the cable.

Truy cập Fanpage để theo dõi tin tức hằng ngày

Xem thêm sản phẩm chính hãng giá rẻ tại đây

Sẵn giá – Báo ngay –  Bảo hành 12 tháng – Tư vấn, lắp đặt 24/7

Số ĐT: 0379720873  – Mr Đức (Zalo)

Email: duc@stc-vietnam.com

Skypee: duc@stc-vietnam.com