Spring element, short
For applications with limited axial play, low dynamics and reduced mounting space.

 Order code
 8.0010.4H00.0000

Spring element, long
For applications with axial play and low dynamics.

 Order code
 8.0010.4I00.0000

Cylindrical pin, long with fastening thread
Suitable for spring element short (8.0010.4H00.0000) and long (8.0010.4I00.0000).

 Order code
 8.0010.4700.0000

Fastening arm, short (flexible)
For applications with axial and radial play, low dynamics.

 Order code
 8.0010.40M0.0000

Fastening arm, medium (flexible)
For applications with axial and radial play, for constant rotary movements.

 Order code
 8.0010.40E0.0000

Fastening arm, long (flexible)
For applications with axial and radial play, and low dynamics.

 Order code
 8.0010.4R00.0000

Stator coupling, double-winged
For applications with high demands for accuracy.

 Order code
 8.0010.4D00.0000

Stator coupling, for fixing to side of encoder
For standard applications with axial and radial play, and high dynamics.

 Order code
 8.0010.1602.0000

Stator coupling, for fixing to front of encoder
For applications with axial and radial play, and high dynamics.

 Order code
 8.0010.40L0.0000

Spring tether element
For applications with low axial and radial play, and low dynamics.

 Order code
 8.0010.40W0.0000

Stainless steel clamping ring
For apllications with high rotational speeds.

 Order code
 8.0010.4W01.0000 6,2x30mm fuer 12mm Hollow shaft

Isolation insert, hollow shaft Ø 15mm
Thermal and electrical isolation of the encoders (Temperature range -40 ... +115°C). Isolation inserts prevent currents from passing through the encoder bearings. These currents can occur when using inverter controlled threephase or AC vector motors and considerably shorten the service life of the encoder bearings. In addition the encoder is thermally isolated as the plastic does not transfer the heat to the encoder.

 Order code
 8.0010.4021.0000 Ø 6mm
 8.0010.4022.0000 Ø 6,35mm (1/4")
 8.0010.4020.0000 Ø 8mm
 8.0010.4024.0000 Ø 9,53mm
 8.0010.4023.0000 Ø 10mm
 8.0010.4025.0000 Ø 12mm
 8.0010.4026.0000 Ø 12,7mm (1/2")