STANDARD TYPE S8D SERIES [25~40W] SPG Motor - SPG Motor Vietnam - STC Vietnam

■ MOTOR DIMENSION	■ CHARACTERISTIC CURVE
■ SPEC for output shaft of motor - (Table1)	■ CIRCUIT DIAGRAM
MODEL GEARED TYPE STRAIGHT TYPE D-CUT TYPE KEY TYPE S8D25-□A S8D40-□A S8D25-□S S8D40-□S S8D25-□D S8D40-□D S8D25-□K S8D40-□K 출력축 구분	The direction of motor rotation is as viewed from the front shaft end of the motor.

                                                                                                                                                                                   [Voltage : DC 24V]

※ Run duty is valued at rated voltage and No load.

▼ GEARED MOTOR		▼ INTER-DECIMAL GEAR HEAD
※ MOTOR MODEL : S8D25-□A, S8D40-□A ※ HEAD MODEL : S8□A3□ ~ S8□A200□		※ MODEL : S8GX10B
▼ ※30(40) - (Table1)	▼ SPEC for output shaft of gearhead - (Table3)	▼ KEY SPEC GEAR HEAD MOTOR
GEAR HEAD SIZE:mm[inch] S8□A3□ ~ S8□A18□ 32[1.260] S8□A20□ ~ S8□A250□ 42.5[1.673]	MODEL 출력축 구분 STRAIGHT TYPE S8SA3□~S8SA250□ D-CUT TYPE S8DA3□~S8DA250□ KEY TYPE S8KA3□~S8KA250□
▼ WEIGHT - (Table2)
PART WEIGHT:kg(oz) MOTOR 1.7/1.8(60.0/63.5) DECIMAL GEAR HEAD 0.43(15.2) GEAR HEAD S8□A3□~S8□A18□ 0.43(15.2) S8□A20~S8□A40□ 0.57(20.1) S8□A50~S8□A250□ 0.61(21.5)

S6D10-24A

S8D40-90A

■ The code in ■ of gearhead model is for gear ratio
■ It is the permissible torque of the assembled motor and gearhead. 
    The permisdsible torque of the ombination of the reqular gearhead and the inter-decimal gearhead is 30kgf.cm
■ ■ color indicates that the output shaft of the geared motor rotates in the same directio as the output shaft of the motor.
     Others indicate rotation in the opposite direction.
■ No Load rpm equats Motor no load rpm divided ty gear ratio. The actual rotation speed is less 2~20% than the displayed value according lo the load
■ There is no marked the "L" code for it is an exclusive use.

SPG Motor Vietnam - STC Vietnam